For detailed information, other images and documents, please select individual articles from the following table.
CERAfix 316 sealing tape
Sealing tape for watertight sealing of connection and moving joints.
Register now and access more than 150,000 products
Variants
Register now and access more than 150,000 products
- The sealing material is permeable to water vapour, which allows it to dry faster
- Highly resistant to water pressure and watertight, with a burst pressure of over 2.0 bar
- Flexible and tear resistant
- Very low emissions
- High level of resistance ensures that aqueous thin-bed mortars and sealing materials dry out properly
Our products featuring the EMICODE label are low in emissions/harmful substances. The EMICODE label classification system certifies the environmental and health compatibility of construction products, based on strict emission requirements from recognised institutes.
For expansion and movement joint sealing as a system with sealing components and CERAfix 315 system balcony film. For use under tiles and panels in indoor and outdoor applications, e.g. in bathrooms, showers, private and public toilets, as well on terraces, balconies, in swimming pools and pool surrounds.
Substrate
All standard surfaces that are suitable for applying seals or tile coverings and have been properly prepared. The substrate must be load bearing, sufficiently flat in accordance with DIN 18202 and free from cracks and adhesion-impairing substances. It must be largely closed and have a suitable surface structure and sufficient strength. Smooth concrete surfaces must be roughened. Separation cracks must be assessed by experts and, where necessary, sealed non-positively with CERAfix 203.
Application
Wherever possible, lay the sealing tape in a loop around the movement joints. Overlap sealing tape joints or connections with all sealing tape, pre-formed parts and corners by at least 5 to 10 cm.
Sealing tapes must be used to create watertight movement and connection joints. Use a 4-6 mm notched trowel to apply CERAfix 301 on both sides of the joints to be bridged, covering an area approximately 2 cm wider than the sealing tape. Lay the sealing tape in the fresh layer and carefully press it into the sealing layer using a smoothing trowel or pressure roller to remove any air bubbles and creases. Ensure that the tape is fully embedded and bonded across the entire surface! The tape must be bonded so that it is not possible for water to get behind the CERAfix 316. Lay the CERAfix 316 in a loop around the movement joints. Overlap the sealing tape joints by at least 5 to 10 cm, bond them to the sealing material over the entire surface and smooth out any creases, then cover them with the chosen sealing material.
In applications exposed to pressurised water, insert a hydrophobic foam cord, apply another layer of CERAfix 316 sealing tape, bond and cover with the corresponding sealing material
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!