For detailed information, other images and documents, please select individual articles from the following table.
HHS 100 PLUS adhesive lubricant
High-performance dry lubricant for extremely dusty and dirty environments with excellent lubricating properties due to the boron nitride additive.
Register now and access more than 150,000 products
Variants
Register now and access more than 150,000 products
Reduction in wear due to targeted application
- Excellent creep and penetrating properties.
- Dry protection layer ensures excellent sliding properties and prevents the adhesion of dust, dirt and other impurities.
- Eliminates creaking and squeaking noises.
Outstanding protection and durability
- Ideally suited for lubrication in very dirty, dusty and dry environments.
- Extended lubrication intervals due to the wear resistance of the lubricated surfaces.
- Outstanding sealing behaviour against moisture and dirt.
- Offers long-lasting corrosion protection.
Wear resistance and material compatibility
- Boron nitride allows a wide temperature range for consistent lubrication.
- In the event of oil attenuation above 180 °C, boron nitride takes over lubrication up to 1,000 °C (dry lubrication).
- Outstanding material compatibility with steel, non-ferrous metals, stainless steel, EPDM, FKM, NBR.
- Free of microplastics.
This product is NSF H1 registered (173356). The registration confirms that the product meets the requirements of the NSF programme for lubricants that may come into contact with food, where such contact is technically unavoidable.
- NSF certification for use in the food industry.
- NSF registered in accordance with NSF H1: The product can come into contact with foodstuffs for technical reasons.
- If used in areas in which food is processed or stored, only the minimum quantity technically required may be used. If using the product as a corrosion-protection film, it must be removed completely before the device is put back into operation.
For professional lubrication in extremely dusty and dirty environments, such as chains, sliding surfaces and gear wheels.
- Shake the can well before use.
- Thoroughly pre-clean the points to be lubricated.
- Then spray evenly onto the cleaned surface.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!