VAKU acrylic filler
FILR-(VAKU-ACRYLIC)-WHITE-400ML
Register now and access more than 150,000 products
- Ready to use and quick and easy to apply. It saves time and does not require a hardener.
- The filler can be sanded and painted over with a variety of paints and varnishes.
- Good adhesion and backfilling.
- The product is solvent free and low odour.
For indoor use only. Wear a fine-dust mask when sanding. Store VAKU acrylic filler in a cool, but frost-free place. Do not expose to direct sunlight. When unopened, it can be stored for 1 year.
| Ready-to-use, 1-component water-based filler | ||||
| Item | Surface | Preparatory work before filling | Pre-treatment | Intermediate and final treatment |
| 1. | Carpentry Wood Metal | The surface must be dry and free of dust, grease and loose particles. Note the risk of discolouration/bleeding through from nicotine, rust etc. An insulating primer must be applied in these cases. | Untreated wood and metal should be treated with a primer. We recommend that you prime very absorbent surfaces in order to prevent uneven surface absorption. | After sanding work, we recommend intermediate treatment with an appropriate primer before applying top coats. Can be treated with almost all paints and varnishes available from retailers. |
| 2 | Plasterboard and chipboard | See item 1. | See item 1. | See item 1. |
| 3. | Gypsum joints | Not recommended. The material is not suitable for this area. | ||
| 4. | Wallpaper and fabrics | See item 1. | See item 1. | See item 1. |
| 5. | Wet rooms | Not recommended. The material is not suitable for this area. | ||
| 6. | Concrete Aerated concrete Calcium silicate block Interior plaster | Not recommended. The material is not suitable for this area. | ||
| 7. | The details in this product information have been compiled to the best of our knowledge and conform to our latest application methods. However, they can and should be regarded as a recommendation only, since the different surface properties, working methods and applications are outside of our control. Attention must be paid to any special cases arising from conditions on site. | |||
Datasheets(X)
Filling and surface filling, e.g. on door leaves, wooden beams, door and window frames and similar items made from wood and steel.
Apply VAKU acrylic filler using a steel joint knife at temperatures no lower than +5 °C. The surface must be clean, stable and dry. Maximum coat thickness: approx. 2 mm. Absorbent surfaces, steel surfaces and untreated wooden surfaces must be primed beforehand. Wear a fine-dust mask when sanding. Thoroughly remove all dust from sanded surfaces before applying wallpaper or paint.
Contents | 400 ml |
Weight of content | 720 g |
Chemical basis | Acrylic resin |
Adhesive agent | Latex |
Solvent | Water |
Filler | White dolomite marble |
Colour | White |
Hardener content | 0 % |
Density | 1.8 g/cm³ |
Density conditions | at 20°C |
pH value | 9 |
Max. working life | 1 s |
Min. working life | 1 s |
Conditions for working life | at 20°C |
Conditions for drying time | at 20°C |
Min. drying time | 1 d |
Max. drying time | 1 d |
Full curing speed | 4 mm/d |
Min. processing temperature | 5 °C |
Fully hardening/curing conditions | 20°C |
Min. adhesive strength | 1.5 N/mm² |
Dry volume fraction | 59 % |
Max. temperature resistance of the hardened material | 0 °C |
Solvent-free | Yes |
Flammability | None (does not spread or feed fire) |
Application quantity conditions | with surface spatula, 0.3-mm layer thickness |
Application quantity in volume/area | 0.3 l/m² |
Max. permissible VOC concentration | 0 % |
Max. VOC concentration | 0 % |
Shelf life from production | 12 Month |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!