Tapping and chipping hammer BMH 40-BL
HAMDRLCHPNGHAM-EL-(BMH40-BL)-PLG/J
Art.-no. 0702554107
EAN 4065746333917
Register now and access more than 150,000 products
Maintenance-free and durable
- Brushless motor
- Suitable for tough construction site conditions
- Robust die-cast aluminium housing
Ideal when working in softer materials
- Control electronics with stepless speed and stroke rate adjustment
- Consistent speeds under load
- Feedback control with stepless speed and stroke rate adjustment
Fatigue-free and safe working
- 12 chisel settings allow adjustment to different working angles during chiselling work
- Safety slip clutch mechanically decouples the drive if the drill jams
Datasheets(X)
Nominal voltage | 230 V/AC |
Frequency | 50 Hz |
Protection class | Protection class II/protective insulation |
Power input | 1150 W |
Power output | 650 W |
Min./max. idle speed | 250-500 rpm |
Min./max. impact rate | 1430-2850 rpm |
Tool holding device | Suitable for SDS-max |
Impact energy | 8.7 J |
Min./max. drilling diameter in concrete | 12-40 mm |
Min./max. recommended drilling range for optimum performance (in concrete) | 25-35 mm |
Max. drilling diameter of breakthrough drill in concrete | 65 mm |
Max. drilling capacity (volume) in concrete per minute | 1 cm³ |
Max. chiselling power in concrete | 200 kg/h |
Max. drilling diameter of hollow drill bit in masonry | 105 mm |
Weight of machine | 7.5 kg |
Cable length | 3.8 m |