Solvent welding agent WÜTOP Thermo ERS
Solvent welding agent WÜTOP Thermo ERS
ADH-PVC-SOLWELDCOMPD-TRANSP-1250ML
Register now and access more than 150,000 products
Wide range of applications:
Available in 1.25-litre and 5-litre containers. Welding of TPU and PVC films entirely possible.
Saves time and money:
Fast and easy application thanks to practical bottle with brush.
Low level of consumption
With 1 litre of solvent welding agent, up to 220 m² of film surface can be welded.
Application instructions
- The surfaces must be clean, dry and free from dust, oil and grease.
- Add the necessary amount of solvent welding agent to the bottle with brush and screw on the brush attachment.
- Repel Wütop® Thermo ERS in the area of overlapping and apply the solvent welding agent. Please observe a minimum application width of 6 cm. Apply a sufficient quantity of solvent welding agent to produce a flat film.
- Turn over roof protection film and roll on firmly over the entire seam using the press-on roller.
- Immediately after application, do not mechanically load the roof protection film.
- Check the welding seam for leakage.
- Do not store solvent welding agent in the bottle with brush permanently. Should always be emptied after completion of work.
Datasheets(X)
Chemical basis | Tetrahydrofuran |
Colour | Transparent |
Shelf life from production/conditions | 12 Month / frost-free storage area |
Contents | 1250 ml |