Self-tapping screw with flat head Sheetite®
SHEETITE DBS steel zinc plated flat head TXP
SCR-PANHD-TSS-TXP10-(A2K)-M3X6
SHEETITE
Art.-no.
0209901306
EAN 4056807524016
Prices for customers after login
Availability in a Würth branch office
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +41 61 705 91 00.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 150,000 products
Steel, zinc-plated, toothing under head, hexalobular (TXplus)
Efficient connection of (thin) sheets
- Direct screwing
- Optimised capacity thanks to round shaft cross-section
- Flexible pre-punch design
- Improved hole finding thanks to rounded tip
- Low tapping torques
- Process-reliable assembly
- No cutting or processing of the thread required
- Play-free and self-locking thread seating
- Toothing under the head for increased breakaway torque
NoticeThe suitability of Sheetite® for the application or component in question must be determined by preliminary testing!
Product information
Datasheets(X)
Application area
For a secure connection in thin sheet metal (up to approx. 520 N/mm²)
Thread type x nominal diameter (d1) | M3 |
Length (l1) | 6 mm |
Head diameter (dk) | 5.6 mm |
Head height (k1) | 2.4 mm |
Head type | Flat head |
Material | Steel |
Surface | Zinc plated |
Thread type | Metric thread |
Internal drive | TX10 |
RoHS-compliant | Yes |
Locking device operating principle | Serration |
Locking function | Locking against self-loosening by mechanical interlocking |