Rubber valve for scooters SNAP-IN
Angled tyre valve for motorcycle, small cylinder
TYRVLVE-CART-FOR-11.5MM-RIMHOLES
Art.-no.
087943
EAN 4058794768060
Prices for customers after login
Availability in a Würth branch office
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +41 61 705 91 00.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 150,000 products
Notice
Snap-in valves allow for an extension of a max. of 10 mm
Max. working pressure (DIN 7780): 4.5 bar (at +23°C)
When disassembling and reassembling the internal mechanism, make sure there are no air leaks after inflating the tyre
Product information
Datasheets(X)
Instructions
Instructions for correct fitting of Snap-in rubber valves
- check that there are no sharp or rusty edges on the hole in the rim
- lubricate the valve with plenty of tyre fitting paste or liquid lubricant
- place the valve into the hole in the rim and pull with suitable tools until it slots perfectly into place
Length | 32 mm |
Length (bent length) | 30 mm |
Suitable for rim-hole diameter | 11.3 mm |
Max. length elongation | 10 mm |
Max. operating pressure | 4.5 bar |
Conditions for operating pressure | at 23°C, DIN 7780 |
Material | Rubber |
Design | 90°, Curved |
Suitable for vehicle type | Scooter |
DIN | 7780 |
Product weight (per item) | 15.415 g |