Welcome to Würth Switzerland For trade customers only

Retouching paint box

Retouching box
RETCHBOX-12PCS

Art.-no. 08903051
EAN 4046777994803
Prices for customers after login

Availability in a Würth branch office
Exclusively for trade customers

Register now and access more than 150,000 products

For retouching repaired surface damage.

Good colour adjustment and coverage


  • Mixing the colours together achieves a wide range of colours

  • Can be painted over


Non-fading and resistant to weathering


Suitable for indoor and outdoor use.



Good adhesion


Excellent adhesion to painted, plastic and metal surfaces.

Notice

No adhesion to soft PVC.

Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

Used for accurate retouching work using the brush. For pre-retouching work when filling scratches and holes with RSM 2-component repair filler. Can be adjusted from glaze to coverage setting. Suitable for all wooden and decorative surfaces. Recommended for indoor and outdoor use.

Instructions

Dissolve the paints with the mixing thinner provided and, where necessary, mix with other colours on the inside of the lid and/or a separate transparent film to obtain the required colour. Apply the paint with the brush supplied. Do not work when the surface is too wet.


Seal after staining. For more information, please refer to the technical data sheet.

Chemical basis

Nitroacrylate

Colour

Beige
Blue
Brown beige
Yellow
Grey brown
Chestnut brown
Copper brown
Clay brown
Red
Chocolate brown
Black
White

Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 1
Nitrile chemical protective glove Long, heavy-duty design
Nitrile chemical protective glove Long, heavy-duty design
Description:
Permeation level: 1
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information