Welcome to Würth Switzerland For trade customers only

REPLAST plastic cleaner

REPLAST plastic cleaner
REPSYS-PLA-CLEANER-500ML
REPLAST

Art.-no. 08935001
EAN 4045989337590

Prices for customers after login

Availability in a Würth branch office
Exclusively for trade customers

Register now and access more than 150,000 products

Effortless and thorough cleaning
  • Good at cleaning

  • Removes grease and oils
Notice

Carry out preliminary tests to ensure surface compatibility.

Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

The plastic cleaner easily loosens and removes soiling, such as silicone residues, insects, oils and grease. Specifically for cleaning tasks in the automotive sector (bumpers and all other plastic parts). Caravans, sports boats, plastic garden furniture, etc. can also be cleaned.

Instructions

Evenly spray the surfaces to be cleaned. Allow the product to work for at least 2 minutes before wiping dry with a clean, lint-free cloth. Always wipe in one direction. A new cloth should be used each time.

Contents

500 ml

pH value

12.1

Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 5
Nitrile chemical protective glove Long, heavy-duty design
Nitrile chemical protective glove Long, heavy-duty design
Description:
Permeation level: 6
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information