Welcome to Würth Switzerland For trade customers only

Quick hardening glue

Quick-setting glue
QCKSTGLU-WHITE-500G

Art.-no. 0892100111
EAN 4050641996855
Prices for customers after login

Availability in a Würth branch office
Exclusively for trade customers

Register now and access more than 150,000 products

Very quick hardening universal glue for gluing all types of wood
  • Quick to set

  • High degree of initial strength

  • Transparent when dry
Proof of Performance

Complies with stress group D2 according to DIN/EN 204 for gluing indoors with occasional brief exposure to water flowing off or condensation water.

Notice

Processing time, pressure and pressing time depend on the material, humidity, temperature and application quantity.


  • If the temperature is below 20°C, the pressing and processing time is longer

  • If the temperature is above 20°C, the pressing and processing time will be shorter
Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area
  • Gluing indoor doors

  • Indoor stairs and staircase railings

  • Surface gluing of laminated panels

  • Manual edge bonding

  • Assembly, surface, board-joint and block gluing

  • Joint, pin and dowel gluing in softwoods, hardwoods and exotic woods
Instructions

The substrate must be free from dust and grease as well as free from all kinds of dirt. Optimum wood moisture is between 8 and 12 %. Apply an even layer of glue on one side with a brush, spatula or glue roller. For more information, please refer to the technical data sheet.

Container

Bottle

Weight of content

500 g

Colour

White

Chemical basis

Polyvinyl acetate dispersion

pH value

5

Viscosity

10500 mPas

Viscosity conditions

Brookfield

Density

1.09 g/cm³

Min. proportion of solids

53 %

Min. film forming temperature

7 °C

Max. temperature resistance of the hardened material

70 °C

Shelf life from production

12 Month

Min./max. room temperature, material temperature and glue temperature

15 to 20 °C

Min./max. wood moisture

8-12 %

Min. wood moisture

8 %

Max. wood moisture

12 %

Min./max. open time

5-10 min

Conditions for open time

at 20°C and 150 g/m²

Max. pressing pressure

0.7 N/mm²

Minimum pressing times*
at 50°C3–10 minutes
at 80°C1–5 minutes
For assembly gluingat 20°CFrom 12 minutes
For board and block gluingat 20°CFrom 12 minutes
For surface gluingat 20°CFrom 15 minutes
at 50°CFrom 10 minutes
at 70°CFrom 5 minutes
For veneer gluingat 20°C5–10 minutes

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information