Wood connectors

Angle connector type P can be used to attach wood components, windows and façade elements to concrete. Installation tolerances can be compensated for using the slot in the base.

Robust post support bracket with anchor bolts and flat carrier plate mount. Ideal for heavy-duty structures with high aesthetic requirements and improved wood preservation.

For wood-wood joint connections subject to tensile and compression loads e.g. timber frame connectors, wind braces, strut connections

Naturally hard

Economical, lightweight joist hanger (angled outwards) for load-bearing connection of timber joists to wood, concrete or steel. Ideal for standard cross-sections

Ideal for non-structural wood to wood connections. Countersunk bores on either side for neat head connections

Ideal for concealed or visible connections, the plug-in connectors enable a high degree of pre-fabrication and hence a considerable reduction in assembly times

Self-tapping pan head screws for holding together two connector plates. Higher security against working loose.

For attaching and locking of wood/wood connections

Twisting dowel pin with force-pushing UNC thread for steel or aluminium slotted sheet metal connections. High level of corrosion protection due to zinc-flake coating.