Push-in stopper Integra single-walled frame system
For detailed information, other images and documents, please select individual articles from the following table.
Availability in a Würth branch office
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +41 61 705 91 00.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 150,000 products
Variants
Exclusively for trade customers
Register now and access more than 150,000 products
- If you are using Integra specifically for the areas of construction and shopfitting where drawers are subjected to stresses, we recommend using this slide-in stopper and the slide-on front mounting with press-in dowels.
- The push-in stopper stops the panels from banging on the cabinet, as a gap of 1.5 mm is created. The push-in stopper does not work with full extension parts. In this case, we recommend installing an impact bar for the drawer in the cabinet.
Notice
- Two push-in stoppers are needed for each drawer.
- With hard surface coatings, we recommend lowering the hole for the front attachment.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!