Deep-penetrating primer
For detailed information, other images and documents, please select individual articles from the following table.
Deep-penetrating primer
Solvent-free, transparent primer for surface hardening and regulation of absorbency.
Exclusively for trade customers
Register now and access more than 150,000 products
Variants
Exclusively for trade customers
Register now and access more than 150,000 products
Depth action
- High penetration due to fine-particle Hydrosol
- Excellent adhesive action
Quick drying
Rapidly ready for further work
Weatherproof
Suitable for indoor and outdoor use
Ready to use
- Ready for use directly from the container
- No mixing necessary
- Quick to use
Alkali-resistant
Minimised emissions and solvent-free
Notice
To ensure a good priming effect, do not mix with other painting materials.
EU limit for this product:
- Category: H (Wb): 30 g/l (2010)
- This product contains < 1 g/l VOC.
Application areaAqueous primer for surface hardening and regulation of absorbency. Due to the fine-particle Hydrosol, the deep-penetrating primer penetrates deep into the substrate and ensures optimum adhesion of fillers, PU foam etc. to walls, floors and ceilings in indoor and outdoor applications. For use on stucco, plaster and plasterboard, sand-lime brick, tiles and hard burnt brick, concrete and aerated concrete, and slightly chalking but load-bearing existing coatings.
InstructionsThe base material must be dry, firm, sound and clean (note VOB part C, DIN 18 363, Section 3).
The primer is ready to be applied direct in an undiluted form using a roller, brush or suitable spraying device. Highly absorbent substrates should be primed twice without any drying time (wet on wet). The primer must be applied such that, after drying, the surface remains matt, i.e. the primer should not dry with a glossy finish.
For more information, please refer to the technical data sheet.
The primer is ready to be applied direct in an undiluted form using a roller, brush or suitable spraying device. Highly absorbent substrates should be primed twice without any drying time (wet on wet). The primer must be applied such that, after drying, the surface remains matt, i.e. the primer should not dry with a glossy finish.
For more information, please refer to the technical data sheet.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!