Cap nut HM for Fixanchor W-FAZ PRO
The images are examples. For detailed information, other images and documents, please select individual articles from the following table.
Cap nut HM for Fixanchor W-FAZ PRO
The cap nut for the W-FAZ PRO. Highest performance and maximum safety. Provides an elegant head closure, e.g. for railing fastenings. Zinc-plated steel
Availability in a Würth branch office
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +41 61 705 91 00.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 150,000 products
Variants
Exclusively for trade customers
Register now and access more than 150,000 products
- Special cap nut for use with Fixanchor W-FAZ PRO
- Visually appealing and elegant head finish
- Safety for processors and end users, as there is no risk of injury from protruding, sharp-edged stud bolts
- Application is regulated by European Technical Assessment ETA-20/0229
Notice
The installation instructions must be observed. Before screwing on the HM cap nut, the pin overhang must be checked.
Application area
Cap nut HM for use with Fixanchor W-FAZ PRO
- Fixing point in cracked or non-cracked normal weight concrete C20/25 to C50/60 for pre-positioned, in-place and stand-off installation
- Ideal for visually demanding mounting with reduced risk of injury
- Suitable for anchoring medium to heavy loads in concrete: Mounting of e.g. railings, handrails, supports, steel beams etc.
- Fastenings under seismic conditions in earthquake areas
- Fastenings under exposure to fire
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!