Bitumen tape Bitu Roll KSK
For detailed information, other images and documents, please select individual articles from the following table.
Bitumen tape Bitu Roll KSK
Strongly self-adhesive, crack-bridging premium bitumen sealing strip for reliable waterproofing of buildings
Availability in a Würth branch office
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +41 61 705 91 00.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 150,000 products
Variants
Exclusively for trade customers
Register now and access more than 150,000 products
- Suitable for seals according to DIN 18533-1 class W1.1-E; class W1.2-E; class W4-E against soil moisture and non-pressurised water on floor boards and walls in contact with the ground, wall bases
- Suitable for sealing balconies, loggias and arcades under appropriate protective layers according to DIN 18531-5
- Suitable for use as a bitumen masonry barrier strip according to EN 14967:2006.
- Quality tested in accordance with DIN EN 13969
Fast and safe to apply
- One-sided self-adhesive surface ensures simple and quick application of the strip
- Highly tear-resistant support material protects against damage
- Laying is up to 50 % quicker than conventional sealing systems
- Immediately resistant to water and driving rain
- Can be applied all year round from -5°C (below 0°C with primer)
- Radon-proof
- Fire behaviour: Class E
- Watertightness: Passed
- Impact load resistance: tight, method B:≤ 1250mm
- Resistance to ageing/degradation: Passed
- Lasting resistance to chemicals: Passed
- Cold bending behaviour: ≤ -30°C
Notice
Not permitted for waterproofing cellars against water penetration from outside in accordance with DIN 18195 Part 6 or DIN 18533 1-2.1/2.2 and according to application class W3-E (non-pressurised water on ceilings covered with earth).
Application area
- Suitable for permanent and secure sealing according to DIN 18533-1 class W1.1-E; class W1.2-E; class W4-E (soil moisture and non-pressurised water on floor boards and walls in contact with the ground and wall bases)
- Suitable for sealing balconies, loggias and arcades under appropriate protective layers according to DIN 18531-5
- Suitable for sealing between floor and wall as a bituminous masonry barrier in accordance with EN 14967:2006. Can also be used as an L or Z barrier.
- Surface sealing against radon gas
Instructions
- Absorbent and porous surfaces must be pre-treated with Bitu Roll KSK primer (art. no. 0997889635). Primer should always be used at processing temperatures between -5°C and 0°C.
- Cut to length, remove the protective paper from the sealing tape and apply the sealing tape without creasing
- To ensure proper adhesion, the tape must be pressed onto the surface and smoothed with a press-on roller or a similar tool
- When connecting strips, the overlap should be at least 50 mm
- Sealing tape not permanently UV-resistant, outdoor exposure must be limited to an installation time of up to 4 weeks
- Please refer to the technical data sheet for further information
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!