For detailed information, other images and documents, please select individual articles from the following table.
ASSY® 3.0 SK A2 slate screw
The ASSY®3.0 A2 slate screw with flat back wall head and a head diameter larger than 9 mm is ideal for rapid, precise and power-conserving mounting of slates in difficult areas, and in hard or resilient formwork or in wood.
Register now and access more than 150,000 products
Variants
Register now and access more than 150,000 products
- Wobble-free drive and rapid screw grip for high degree of reliability when inserting
- High resistance to extraction and shear
- Ideal for materials ranging from wood to A2 stainless steel
- Head diameter > 9 mm
Hardwood must be pre-drilled in accordance with ETA-11/0190.
ASSY 3.0 chipboard screws are optimised for use in wooden materials. Use in plastic dowels may cause a reduction in the load-bearing capacity. Therefore, we recommend only using screws without optimised thread tips (drill tip, mating thread, ring thread, serrated edge, self-clearing groove, etc.) in plastic dowels, e.g. Würth ASSY D, prefix number 0151 (countersunk head) and prefix number 0153 (pan head).
When using these screws, please comply with ETA-11/0190 specifications.
For mounting slate on difficult roof and wall spaces or over large areas.
Direct mounting through the holes present in the slate (from bottom to top) without any additional materials.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!