2-component B2 frame foam
For detailed information, other images and documents, please select individual articles from the following table.
2-component B2 frame foam
For the installation of door frames, windowsills and steps
Availability in a Würth branch office
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +41 61 705 91 00.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 150,000 products
Variants
Exclusively for trade customers
Register now and access more than 150,000 products
- Non-chlorinated hydrocarbons
- No formaldehyde or PCB
- Construction class B2 as per DIN 4102
- Pressure and tension-free hardening without being affected by humidity
Instructions
The surface must be clean, dry and free from loose particles and release agents. Pretreat plaster and gas concrete with primer. Cut off cartridge ends with a knife and apply mixing tube. Also use extension tube for narrow and deep joints. Wear gloves! Do not work with dirty hands/gloves as a general rule. For further details, refer to the technical information leaflet.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!