Welcome to Würth Switzerland For trade customers only

Plastic care

Plastic care
PLACARECOMPD-1000ML

Art.-no. 0893477
EAN 4045989678792

Prices for customers after login

Availability in a Würth branch office
Exclusively for trade customers

Register now and access more than 150,000 products

High-quality care wax for all outdoor plastic and rubber parts

Excellent colour refreshing and silk-matt gloss


  • Ideal for matt, whitened plastic parts

  • Well-kept appearance, looks good as new


Provide permanent care and protection against environmental influences


  • Plastic and rubber parts remain supple

  • Protects against material brittling and whitening

  • Water and dirt-repellent


Care wax


  • High yield, economical to use

  • Simple, targeted use

  • No run-off in rain
Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

For unpainted plastic bumpers, exterior mirrors, panel parts, spoilers, tyre walls, rubber seals etc.

Instructions

Thorough pre-cleaning with Absobon basic vehicle cleaner. Apply an even coat of the plastic care with a sponge or cloth and work into the roughest surface texture. We recommend using a rough sponge for extremely faded parts. The gloss effect can be enhanced even more by simply polishing the surface. Protect from frost.

Contents

1 l

Smell/fragrance

Lemon

Colour

White

Chemical basis

Mineral oil

Density/conditions

0.81 g/cm³ / at 20°C

AOX-free

Yes

Silicone-free

Yes

Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 6
Nitrile chemical protective glove Long, heavy-duty design
Nitrile chemical protective glove Long, heavy-duty design
Description:
Permeation level: 6
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information