Nylon anchor with metric thread
Nylon anchor with metric thread
DWL-PLA-INTHR-M6-8X40
Art.-no.
09038 406
EAN 4024835113953
Prices for customers after login
Availability in a Würth branch office
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +41 61 705 91 00.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 150,000 products
High-quality polyamide (nylon)
- High-quality polyamide (nylon)
- Halogen and silicon free
- Temperature resistant from -40°C to +80°C
- The hammer-in stop prevents premature expansion during push-through installation
- The twist lock prevents turning in the drill hole
- Anchor collar with no expansion pressure prevents damage to plaster and tiles
- Push-through and cotter-pin installation
Notice
- Drill aerated concrete and perforated brick with a rotary drill (without impact mechanism)
- Drill cuttings must be removed from the drill hole
- Screw length = thickness of attached part (+ thickness of plaster/insulation) + anchor length + screw diameter
Product information
Datasheets(X)
Application area
- Plastic anchor for light loads (secondary attachments)
- Can be used in concrete, solid brick, solid sand-lime brick, aerated concrete, hard natural stone
- Suitable for securing curtain rails, wall shelves, light wall cupboards, picture frames, cable ducts, cable clamps, electrical switches, towel rails, information signs, motion detectors, hanging baskets etc.
- For attaching components in conjunction with a wood or chipboard screw (without drill bit tip, counter thread, ring thread)
- Can be used outdoors or in wet rooms in conjunction with a stainless steel screw
- Nylon anchor with M6 metric thread: For screwing in threaded rods or screws
Anchor diameter | 6 mm |
Anchor length (l) | 40 mm |
Nominal drill-bit diameter (d 0) | 8 mm |
Required wood screw diameter (d scr.wood) | 4.5 - 5 mm |
Required particle-board screw diameter (d scr.particle) | 6 mm |
Embedding depth (h s) | 40 mm |
Centre-to-centre distance (a) | 80 mm |
Edge clearance (a r) | 40 mm |
Drill hole depth (t) | 50 mm |
Max. attachment height (d a) - condition | Dependent on screw length |
Required screw length (l s) | Thickness of the add-on part (+ plaster/insulation thickness) + anchor length + screw diameter |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!