Multi-purpose grease IV
Multi-purpose grease, IV NSF
GRSE-(MULTIPURPOSE IV)-400G
Register now and access more than 150,000 products
- Suitable for food-contact areas
- EP additives for high pressure resistance
- Excellent dry-running properties
- Good sealing effect and corrosion protection
Greases are delivered in plastic cartridges! The plastic cartridges improve storage (they prevent the grease from oozing out at high temperature). Store cartridges upright in a cool, dry place! The operating instructions of the vehicle, machinery and assembly manufacturers must be observed.
Datasheets(X)
Synthetic high-performance grease with white solid lubricants for the food industry.
Clean the lubricating point thoroughly before filling for the first time. Apply a thin and even coat to the parts to be lubricated. Observe the bearing manufacturer's specifications! Avoid mixing with other greases wherever possible. If used in areas in which food is processed or stored, only the minimum quantity technically necessary may be used.
Weight of content | 0.4 kg |
Container | Cartridge |
Soap base | AL complex |
Lubricant code | KPFHC2R-40 |
Min./max. temperature conditions | -45 to 180 °C |
Colour | White |
NLGI grade/conditions | 2 / with DIN 51818 |
Base oil viscosity, kinematic/conditions | 350 mm²/s / at 40°C |
Min. dripping point/conditions | 250 °C / in accordance with DIN ISO 2176 |
Min./max. worked penetration /conditions | 285 x 0.1 mm-285 x 0.1 mm / in accordance with DIN ISO 2137 |
Corrosion protection period/category | Corrosion category 0 |
VKA welding load | 3000 N |
Shelf life from production | 24 Month |
Oil basis | Synthetic |
Lubricant system | Grease |
Smell/fragrance | Characteristic |
Density | 0.981 g/cm³ |
Density conditions | at 20°C |
Conditions for viscosity of oil basis | at 40°C |
Dripping point conditions | in accordance with DIN ISO 2176 |
Min. temperature conditions | -45 °C |
Max. temperature conditions | 180 °C |
Max. short-term temperature resistance | 200 °C |
Worked penetration conditions | in accordance with DIN ISO 2137 |
Conditions for NLGI grade | with DIN 51818 |
Corrosion protection period conditions | in accordance with DIN 51802, SKF Emcor test |
Conditions for VKA welding load | in accordance with DIN 51350-4, VKA test (Institute for Internal Combustion Engines) |
Resin-free | Yes |
Silicone-free | Yes |
Acid-free | Yes |
AOX-free | Yes |
Free from heavy metals | Yes |
Chloric | No |
Resistance against | Water, Salt water, Acid, Lye |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!