Lead-free bodywork tinning paste
Bodywork tinning paste, lead-free
TINGPAST-BODY-LEADFREE-CAN-1KG
Register now and access more than 150,000 products
- Melting range: 230–250°C
- Complies with the legal specifications of European Parliament Directive 2000/53/EC and the German national used vehicle law
- Tin content 60–70%, lead-free
Datasheets(X)
Lead-free, high-quality S-Sn97Cu3 tinning paste. Flux type in accordance with DIN EN 29454-1. Ideally suited for soft soldering, tinning and pre-tinning when repairing bodywork on passenger cars, lorries, agricultural and construction machinery
The area to be repaired must be bare metal free from rust and grease prior to application. Apply a thin coat of paste and heat with a flame. Then wipe the soldering point using a clean, lint-free cloth.
Weight of content | 1 kg |
Material designation | S-Sn97Cu3 |
Smell/fragrance | Characteristic |
Colour | Light grey |
Max. melting temperature | 250 °C |
Min. melting temperature | 230 °C |
Sn composition of the brazing solder (weight-%) | 65 % |
pH value | Acidic |
Conditions for pH value | at 20°C |
Unleaded | Yes |
Boiling point | 100 °C |
EN standard | 29454-1 |