Welcome to Würth Switzerland For trade customers only
Interior window sealing tape Euraseal I-170 - WNDWSEALTPE-(I-710)-EURASEAL-W70MM-L25M

Interior window sealing tape Euraseal I-170

Interior window sealing tape Euraseal I-710
WNDWSEALTPE-(I-710)-EURASEAL-W70MM-L25M

Art.-no. 0875578070
EAN 4056807841700
All versions

Prices for customers after login

Availability in a Würth branch office
Exclusively for trade customers

Register now and access more than 150,000 products

Sealing tape with high level of vapour diffusion tightness of the aluminium film

A product from the WÜRTH Sealing System


The individual product components from the WÜRTH Sealing System are matched to each other with regard to material compatibility.



Airtight and water-vapour-tight


The specifications of the applicable German heat protection ordinance and DIN 4108 Part 7 are fulfilled when the product is used correctly.



Easy to use


The excellent adhesive strength of the butyl ensures that the sealing tape is easy to install.

Notice

Cannot be plastered over.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

The reliable, easy-to-install sealing tape is used for:


  • Airtight and water-vapour-tight inner window joints.

  • Completely plastered indoor reveals in old buildings and prefabricated buildings.
Instructions

1. Remove oil, grease and any loose material from substrate.


2. On mineral and highly absorbent surfaces, we recommend using a butyl primer.


3. Pull the protective film off the butyl strip and place on the masonry such that the butyl strip is positioned behind the inner window pane; press on firmly using a press-on roller.


4. Fill foam into the joint with PURLOGIC Top or PURLOGIC Flex.


5. Pull the protective paper off the self-adhesive strip and stick to the window frame with an overhang of 10 mm to 15 mm; press on firmly using a press-on roller.


6. The sealing tape can be covered with a strip.


7. The butyl strip and the flexible tape adhesive, flexible tape adhesive plus or EPDM sealing tape adhesive must not come into contact with each other.

Colour

Bronze coloured

Backing material

Aluminium foil

Adhesive base

Acrylate
Butyl

Width

70 mm

Thickness

0.2 mm

Length of roll

25 m

Design

With self-adhesive strips on both sides

Min./max. processing temperature

5 to 50 °C

Min./max. temperature resistance

-40 to 100 °C

Design of the carrier material

Vapour diffusion layer, fabric-reinforced, tear-resistant

Building material class/conditions

B2 - Normally inflammable / in accordance with DIN 4102

Ultraviolet resistance

Yes

Min. air layer thickness equivalent to water-vapour diffusion

120 m

Max. water-vapour diffusion resistance factor value µ

800000

Dynamic peel strength at 25 mm

11 N

Resistance against

Aging

Building material compatibility

Conventional building materials

Shelf life from production/conditions

12 Month / at 20°C

Additional accessory:
 
Product
Description
Quantity
PU
Price
/PU
Butyl primer
Butyl primer

UNDRCOAT-(BUTYL-BITU)-PRIMER-750ML

Improved adhesion on rough, porous and absorbent surfaces. Also suitable for bitumen tapes
Primer spray
Primer spray

SPRPRIM-(BUTYL-BITU)-TRANSP-500ML

Spray adhesion promoter for applying butyl and bitumen tapes to porous and absorbent surfaces.
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Additive article:
 
Product
Description
Quantity
PU
Price
/PU
Press-on roller
Press-on roller

WLPAPPRESROLL-F.SRAY-CONTACT-ADHESIVE

For pressing on large areas of material bonded with contact adhesive
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details