Insulation nail W-IN
Insulation nail W-IN 90mm
DWL-(W-IN)-PLA-D90MM-140-8X160
Art.-no.
0903791160
EAN 4045727508725
Prices for customers after login
Availability in a Würth branch office
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +41 61 705 91 00.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 150,000 products
For mounting soft, not self-supporting insulating materials, such as mineral fibre or glass wool in concrete. Design with plate dia. 90 mm
- High-quality PP
- Thermally stable from -40°C to +80°C
- Small drill hole diameter (8 mm)
- Quick, easy installation
- Low insertion depth, min. 20 mm — less time drilling
- Anchor without expansion nail
Drill the hole
Set anchor in place
Fasten insulation, knock in anchor until flush
Product information
Datasheets(X)
Application area
- For attaching insulation materials for façades with rear ventilation
- For attaching film, sealing membrane outside cellars
- Can be used in various solid surfaces, e.g. concrete, solid sand-lime brick, clay brick
- For attaching soft insulation materials that are not self-supporting, e.g. mineral wool or fibreglass
Anchor length (l) (l) | 160 mm |
Max. attachment height (d a) (da) | 140 mm |
Disc diameter | 90 mm |
Nominal drill-bit diameter (d 0) | 8 mm |
Embedding depth (h s) | 20 mm |
Drill hole depth (t) | 25 mm |
Material | PP - Polypropylene |
Halogen-free | Yes |
| Performance data | |||
| Base diameter [mm] | 90 | ||
| Recommended working load | Concrete ≥ B25 | Frec [kN] | 0,11 |
| Solid calcium silicate block KS12 | 0,10 | ||
| Masonry brick MZ12 | 0,10 | ||
| Characteristic values | |||
| Drill hole depth | t ≥ [mm] | 25 | 25 |
| Embedment depth | hS ≥ [mm] | 20 | 20 |
| Nominal drill diameter | ddrill [mm] | 8 | 8 |