Füllplan Plus
Wall filler, universal Füllplan PLUS
FILR-(FUELLPLAN PLUS)-20KG
Register now and access more than 150,000 products
Very fine grain yet extremely stable:
- Fill and smooth using only one product
- High filling capacity
- Gypsum-based dry mortar, dust- and water-repellent
- Can be mixed with 50% sand
- Diffusible
- Very easy to smooth and sand
Preparation of the substrate:
- The substrate must be stable, permanently dry and free from dirt and release agents
Typical surfaces:
- Suitable for concrete, solid and load-bearing cement and gypsum plaster, unrendered masonry, aerated concrete, gypsum plasterboard and construction boards.
Datasheets(X)
- For filling joints and smoothing gypsum plasterboard with and without reinforcing tape and for sealing larger holes and slots.
- For filling, smoothing and full-surface finishing of rough substrates, ceilings and walls, irregularly ground, rubbed or felted plaster surfaces, plaster edges and surfaces with shrinkage holes.
- For setting gypsum boards.
Chemical basis | Calcium sulphate |
Adhesive agent | 0 - not applicable |
Min./max. processing temperature | 5 to 30 °C |
Min./max. curing time | 2-24 h |
Solvent | 0 - not applicable |
Max. processing time | 60 min |
Colour | White |
Min./max. drying time | 1-24 h |
Filler | 0 - not applicable |
Mixing ratio | 3 l water for 10 kg |
Full resilience | 24 h |
Contents | 20 l |
Container | Sack |
Shelf life from production | 12 Month |
Conditions for drying time | at 20°C and 50% relative humidity |
Conditions to maintain shelf life from production | cool and dry storage area |
Application conditions | dry |
Min. curing time | 2 h |
May be walked on after max. | 24 h |
May be walked on in following conditions | 0 - not applicable |
Max. curing time | 24 h |
Curing time conditions | depending on layer thickness |
Can be covered after max. | 60 min |
Recoatable/Can be painted over | After completely through drying |
Conditions for full resilience | at 20°C and 50% relative humidity |
Flammability | No |
Solvent-free | Yes |
Resistance against | 0 - not applicable |
Application quantity in weight/area | 1 kg/m² |
Application quantity conditions | depending on the processing/use |