Felt segmented polishing disc For angle grinders with M14 direct mount
Lamella flap disc felt
FLPDISC-FELT-PLA-SR-M14-D125
ZEBRA
Register now and access more than 150,000 products
Quick and simple polishing
High-quality felt (100% sheep's wool)
Excellent surface results
Upright fins and cooling grooves in the disc facilitate cool polishing.
Usable without additional accessories
Felt segmented grinding disc can be used directly on speed-controllable angle grinders and polishing machines owing to M14 thread.
Max. 4000 rpm, recommended 2500-3000 rpm
Apply respective paste with machine running!
Datasheets(X)
Stainless steel, steel, non-ferrous metals and plastic parts and coatings
- Important: If the individual work steps are not carried out carefully, flaws in the surface become even more obvious during buffing.
- The better the pre-sanding, the simpler and shorter the effort required for polishing.
- A separate felt segmented polishing disc should be used for each paste. This prevents mixing of different pastes and impairment of the result.
- Clean clogged felt segmented polishing discs by gently pressing with a wire brush.
- Remove polishing residues on the surface with Wiener Kalk.
- The application recommendations are of a general nature depending on how good the initial surface is or how high the requirements for the surface are.
- Perform preliminary testing or conduct your own tests!
Diameter (Ø) | 125 mm |
Tool holding device | M14 |
Grid size | 0 - not applicable |
Design | Straight |
Material of carrier disc | Plastic |
Max. rotation speed | 4000 rpm |
Material of abrasive medium | 0 - not applicable |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!