FD Alu 1500SK vapour barrier
Flat roof vapour barrier
VAPBRR-FR-ALU-SK1500-1,5X100M-150SM
Register now and access more than 150,000 products
The vapour barrier sheet is especially suitable for laying on steel profile sheets/trapezoidal sheets in flat sloping roof areas >2° angle of inclination.
If moisture is present during application, such as from condensation or rain, the overlapping parts of the membranes must not be opened up. This could compromise the adhesive strength of the acrylate adhesive. If heavy rain is forecast, the overlaps should be weighted down or covered to protect them.
Datasheets(X)
- For roofs with a pitch angle of >2°
- Must not be used as emergency sealing
- Longitudinal seam overlap: 10 cm
- Transverse seam overlap: 15 cm
Type description | Vapour retarder, flat roof |
Coating weight per m² | 150 g |
Length of roll | 100 m |
Roll width | 1.50 m |
Min. air layer thickness equivalent to water-vapour diffusion | 1500 m |
Foil thickness | 0.2 mm |
Material | Aluminium |
Transverse tensile force per 50 mm | 350 N |
Longitudinal tensile force per 50 mm | 500 N |
Building material class | E - Normally inflammable |
Max. temperature resistance | 80 °C |
Weight of roll | 20 kg |
Number per pallet | 10 PCS |
Resistance to penetration of water | W1 |
Min./max. temperature resistance | -30 to 80 °C |
Resistance to tear propagation (transverse) | 250 N |
Resistance to tear propagation (longitudinal) | 250 N |
Width | 1.50 m |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!