Exhaust putty
Exhaust sealant
EXHSTREPCOMPD-CAN-200G
Prices for customers after login
Availability in a Würth branch office
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +41 61 705 91 00.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 150,000 products
Small holes and cracks in the silencer system can be easily and permanently repaired so that they are gas-tight.
- Extremely heat resistant
- Resistant to large temperature fluctuations
- No need to weld or to remove the silencer
Notice
For quicker curing, leave the engine to idle at low speed for around quarter of an hour.
Product information
Datasheets(X)
Application area
Ideally suited for repairing cracks and holes in exhaust systems.
Instructions
- 1. Remove loose dirt and rust using a wire brush.
- 2. Then let the engine run for a short time in order to warm up the exhaust system.
- 3. Wet the area to be repaired and, with wet hands, cover the holes and cracks and surrounding areas with exhaust putty. The paste should be smoothed outwards.
Weight of content | 200 g |
Colour | Grey |
Smell/fragrance | Odourless |
Shelf life from production | 12 Month |
Max. temperature resistance | 800 °C |
Density | 1.99 g/cm³ |
Density conditions | at 20°C |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!