Welcome to Würth Switzerland For trade customers only

De-waxer

Wax remover
WAXREM-20LTR

Art.-no. 0890132
EAN 4099617009427
Prices for customers after login

Availability in a Würth branch office
Exclusively for trade customers

Register now and access more than 150,000 products

De-waxing agent for waxed commercial vehicles

Extremely high cleaning performance


  • Removes wax preservatives without a problem

  • Optimum preparation for work such as painting, priming, coating or printing


Evaporates without residues


Does not cause staining on drying



Does not form an emulsion with water


Does not prevent the use of a light fluid separator (DIN 1999)



Free of AOX and silicone

Notice

Unhardened paints and varnishes can be removed. Check resistance of plastic and rubber parts beforehand. Hazard class/category: Aspiration hazard, category 1.


Do not use water on easily corroding materials.

Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

Vehicles, engines, machines, tools, iron, steel, light-alloy and non-ferrous metals, glass and ceramic

Instructions

Spraying, brushing, high-pressure or immersion methods possible. Check type of preservation before use.



Manual:


Apply undiluted to the surfaces to be de-waxed or cleaned. Application time: approx. 1 to 5 minutes. Then rinse thoroughly with hot water.



High-pressure devices:


Spray the de-waxer onto parts to be de-waxed or cleaned with hot water. Application concentration: 5–10% Allow to take effect for approx. 1 to 5 minutes. Then rinse thoroughly with water.

Contents

20 l

Product weight (per item)

15740.000 g

Chemical basis

Naphtha

Smell/fragrance

Mild

Colour

Colourless

Min. flashing point

65 °C

Density/conditions

0.79 g/cm³ / at 20°C

Shelf life from production/conditions

24 Month / at room temperature

AOX-free

Yes

Silicone-free

Yes

Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 6
Nitrile chemical protective glove Long, heavy-duty design
Nitrile chemical protective glove Long, heavy-duty design
Description:
Permeation level: 6
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information