Construction foam
1C gun foam construction
GUNFM-1C-PU-B3-CONCRETEGREY-750ML
Register now and access more than 150,000 products
- Lagging
- Bonding
- Insulating
- Filling
- Sealing
- Can also be used as well-drilling foam
Moisten application surfaces with water before applying foam. Moisten again if applying several foam beads!
- Foam expands to twice its size after application
- Remove fresh splashes of foam with PU cleaner, art. no. 0892 160
- Clean the PU gun with PU cleaner, art. no. 0892 160
- Does not adhere to PE, PP, silicone, grease or similar
- Store can upright
Datasheets(X)
For clean and controlled backfilling of cavities, insulated sealing of connection joints (window construction, external doors), foam filling of small wall openings and other cavities.
- Surfaces must be clean, solid and free from dust and grease
- Shake can approx. 20 times
- Ensure sufficient ventilation
Chemical basis | Polyurethane prepolymer |
Colour | Concrete grey |
Smell/fragrance | 0 - not applicable |
Moulded density | 12 kg/m³ |
Conditions for moulded density | in released form, tested in accordance with Würth test methods |
Cell structure | Medium - fine |
Cell structure conditions | tested in accordance with Würth test methods |
Tack-free after | 9 min |
Conditions for being tack-free | at 23°C and 50% humidity |
Can be cut after | 16 min |
Conditions for ability to cut | at 20°C and 50% relative humidity |
Full resilience | 12 h |
Conditions for full resilience | at 20°C and 50% relative humidity |
Min. processing temperature | 5 °C |
Max. processing temperature | 30 °C |
Min. ambient processing temperature | 5 °C |
Max. ambient processing temperature | 30 °C |
Min. surface processing temperature | 5 °C |
Max. surface processing temperature | 30 °C |
Min. processing temperature for can | 5 °C |
Max. processing temperature for can | 30 °C |
Min. temperature resistance | -40 °C |
Max. temperature resistance | 100 °C |
Building material class | B3 - Of high flammability |
Building material class conditions | in accordance with DIN 4102-1 |
Heat conductance λ | 0 W/(m*K) |
Heat conductance λ conditions | 0 - not applicable |
Water absorption (%) | 0 Vol-% |
Water absorption conditions | 0 - not applicable |
Compression strength | 5 N/cm² |
Compression strength conditions | based on DIN 53421, at 10% compression |
Min. combined tension and shear resistance | 5 N/cm² |
Conditions for combined tension and shear resistance | in accordance with DIN 53427 |
Min. tensile strength | 10 N/cm² |
Conditions for tensile strength | based on DIN 53430 |
Acoustic insulation for joints | 60 dB |
Ultraviolet resistance | No |
Elongation at break | 12 % |
Elongation at break conditions | based on DIN 53430 |
Yield (volume) approx. | 45 l |
Conditions for yield | at 23°C and 50% humidity |
Contents | 750 ml |
Container | Aerosol can |
Number per pallet | 672 |
Weight of content | 880 g |
Resistance against | 0 - not applicable |
HCFC-free | 0 - not applicable |
CFC (fuel gas) free | 0 - not applicable |
FC-free | 0 - not applicable |
HFC-free | 0 - not applicable |
Shelf life from production | 12 Month |
Conditions to maintain shelf life from production | at 5°C to 25°C |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!