Concrete release agent Plus
Releasing agent for concrete Plus
RLSEAGNT-CONCRETE-PLUS-25LTR
Register now and access more than 150,000 products
- Can be used on heated steel formwork up to +60°C
- Reduces staining on exposed concrete
- Always carry out preliminary tests
- Do not pour used release agent back into its original container
- Avoid puddling
- Do not dilute with water
- Applying too much may cause build-up on the surface and cause the surface to release sand
- Formwork can be heated to max. +60°C. Avoid fire, flying sparks and welding near the freshly sprayed formwork
- Observe the relevant regulations on handling solvent-based materials
Datasheets(X)
Würth concrete release agent Plus can be used on plastic profile formwork, all large-area formwork and any formwork with a sealed surface. It is particularly suitable for rising formwork. It creates a premium-quality surface on exposed concrete, finished parts and filigree elements. Steel formwork can be heated up to +60°C.
Spray in a thin and uniform layer onto the dry and clean formwork. The spraying pressure must be at least 4 bar. Remove excess material with a rubber squeegee or cloth.
Contents | 25 l |
Chemical basis | Paraffinic and naphthenic hydrocarbons |
Density | 0.85 g/cm³ |
Density conditions | at 20°C |
Density/conditions | 0.85 g/cm³ / at 20°C |
Min. temperature conditions | 8 °C |
Max. temperature conditions | 60 °C |
Kinematic oil basis viscosity | 14 mm²/s |
Conditions for viscosity of oil basis | at 20°C |
Chloric | No |
Smell/fragrance | Characteristic |
Shelf life from production | 12 Month |
Conditions to maintain shelf life from production | 0 - not applicable |
Base oil viscosity, kinematic/conditions | 14 mm²/s / at 20°C |
Product weight (per item) | 22350.000 g |
Number of pieces per pallet | 24 PCS |
Weight of content | 21.25 kg |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!