Chipping hammer MH 5 BASIC
Chipping hammer MH 5 BASIC
CHPNGHAM-EL-(MH5 BASIC)-PLG/J
Art.-no.
0702561107
EAN 4065746333900
Prices for customers after login
Availability in a Würth branch office
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +41 61 705 91 00.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 150,000 products
Chipping hammer with SDS-max drive arbor, magnesium die-cast transmission housing and anti-vibration mechanism for comfortable working
- The switch lock ensures comfortable working in continuous operation
- The integrated soft-close system protects the health of the user by reducing vibrations
- The robust and lightweight magnesium die-cast transmission housing is used for optimum heat dissipation in tough construction site use
- Thanks to the integrated constant-velocity electronics, almost constant stroke rates under load are achieved
- The stroke rate can be pre-selected using the dial below the handle
- Two service LEDs visually indicate upcoming carbon brush changes as well as available mains voltage
- Thanks to the electronic soft start, smooth starting is possible
- The restart protection prevents unintentional start-up in the event of a power interruption
Product information
Datasheets(X)
Application area
- Light to medium-weight chiselling on walls made of concrete and masonry
- Chiselling channels in concrete and masonry
- Enlarging openings
- Concrete renovation
Nominal voltage | 230 V/AC |
Frequency | 50 Hz |
Protection class | Protection class II/protective insulation |
Power input | 1100 W |
Power output | 730 W |
Min./max. impact rate | 0-3000 1/min |
Tool holding device | Suitable for SDS-max |
Max. impact energy | 7.1 J |
Impact energy | 7.1 J |
Adjustable chisel position | Yes |
Weight of machine | 5.7 kg |
Cable length | 6 m |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!