Acrylic sealant
Acrylic sealant
ARCYSEAL-IN-WHITE-310ML
Register now and access more than 150,000 products
Can be coated/plastered over
Excellent adhesion of commercially available paints/plasters onto the sealant
Wide range of applications
Suitable for joints indoors subject to less stretching.
Silicone-free
Resistant to ageing, weathering and UV
- Not suitable for use in building construction joints in accordance with DIN 18540
- Due to the large number of varnish and glazing formulations, preliminary testing is required in order to rule out any interactions
- Take care with sealant joints that have been fully painted over. These tend to develop cracks when movement occurs in the joint, as the applied paint is generally less elastic than the sealant and then causes cracks to form in the paint.
- The setting speed is dependent on the application temperature, the weather and the surface moisture. The setting speed is greatly delayed in cold, damp weather.
- Discolouration may occur in wood containing tannic acid
- Not to be used in conjunction with pre-compressed sealing tapes
- Not suitable for bonding or filling cavities
- Due to the large number of varnish and glazing formulations, always carry out your own tests on the area first, especially on alkyd resin paints and powder-coated aluminium
Datasheets(X)
For sealing cracks and damage to plaster, concrete and gypsum.
- The surfaces must be clean, dry and free from grease
- A primer, e.g. with Silicone primer, improves the adhesion for absorbent or porous surfaces
- Please observe the "General Notes on Application for Sealants" overview sheet. Further information in the technical data sheet.
Colour | White |
Contents | 310 ml |
Container | Cartridge |
Chemical basis | Acrylate dispersion |
Density | 1.62 g/cm³ |
Smell/fragrance | Faint odour |
Continuous motion absorption | 15 % |
Shore A hardness | 14 +/- 4 |
Min. breaking elongation | 100 % |
Breaking elongation conditions | in accordance with DIN 53504 |
Full curing speed | 1 mm/d |
Fully hardening/curing conditions | 23°C and 50% relative humidity |
Min. skin-formation time | 15 min |
Conditions for skin-formation time | at 23°C and 50% relative humidity |
Fungicidal properties | No |
Silicone-free | Yes |
Min./max. temperature resistance | -25 to 80 °C |
Min./max. processing temperature | 5 to 35 °C |
Ultraviolet resistance | Yes, when installed to be resistant to driving rain |
Coating compatibility | Yes |
Recoatable/Can be painted over | Conditional, preliminary testing required |
Surface pre-treatment required | Not on natural stone, can lead to discolouration |
Shelf life from production/conditions | 24 Month / at 10°C to 35°C, no exposure to sunlight, no heat sources |