Acrylic for cracks and cleaning
Crack and plaster acrylic
ACRYSEAL-FLEX-WHITE-310ML
Register now and access more than 150,000 products
- Quickly becomes rainproof
- Resistant to ageing, weather and UV
- Paint-compatible
- After hardening you can paint it with most common paints
- Unhardened sealant can be removed with water
Low temperatures and high humidity can cause delays in the drying process. Do not expose unhardened sealant to rain. Non-elastic paints can cause hairline cracks.
Datasheets(X)
To repair and improve damage and cracks in indoor and outdoor textured plaster and plasterboards. Good adhesion on plaster, concrete, brick and tile works, anod. aluminium, plaster, uPVC and wood.
The surface must be clean, dry and load-bearing. Pretreat porous substrates with a diluted acrylic-water mixture of 1:1 to max. 1:5. The sealant can be smoothed with water or a neutral lubricant.
Contents | 310 ml |
Fungicidal properties | No |
Colour | White |
Chemical basis | Acrylate |
Density | 1.65 g/cm³ |
Continuous motion absorption | 12.5 % |
Smell/fragrance | Neutral |
Full curing speed | 2 mm/d |
Fully hardening/curing conditions | 23°C and 50% relative humidity, moisture curing |
Min. skin-formation time | 15 Years |
Conditions for skin-formation time | at 23°C and 50% relative humidity |
Shore A hardness | 12 |
Min./max. temperature resistance | -25 to 80 °C |
Min./max. processing temperature | 5 to 35 °C |
Recoatable/Can be painted over | Conditional, preliminary testing required |
Water-vapour diffusion resistance factor value µ | 3711 |
Surface pre-treatment required | On absorbent or porous surfaces |
Ultraviolet resistance | Good |
Coating compatibility | Yes |
Shelf life from production | 24 Month |
Conditions to maintain shelf life from production | at 5°C to 35°C |