Welcome to Würth Switzerland For trade customers only

2-component clear lacquer Rapid

2C clear lacquer RAPID
CLRLACSPR-2K-RAPID-CLEARCOAT-250ML

Art.-no. 5867000124
EAN 4050641809162

Prices for customers after login

Availability in a Würth branch office
Exclusively for trade customers

Register now and access more than 150,000 products

For permanent sealing of touched-up surfaces and newly painted small parts
  • Very quick-drying, good running two-component clear varnish with excellent resistance to weathering, chemicals and petrol

  • High output rate

  • Quick to dry

  • Constant atomisation pressure until completely empty

  • Excellent resistance to wear and scratches

  • Ideally suited for spot repair work
Notice

Processing time following activation: max. 14 hours. After use, turn the can upside down and spray until the valve is empty.

Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

For high-quality and permanent painting of solvent-based and water-based paint systems.

Instructions

Shake the can well for 2 minutes before spraying. Remove the red push button from the cap, put in the pin at the base of the can and push the pin in as far as it will go; remove and dispose of the red push button. Shake the can well for another 2 minutes. Apply 1-2 thin spray coatings to the prepared surface. Observe the intermediate flash-off time! Yield 250 ml: Approx. 0.5-0.75 m. Dust-dry: 7 minutes Touch dry: 6 hours

Chemical basis

Two-component resin

Contents

250 ml

Dust-drying time

7 min

Container

Aerosol can

Density

0.904 g/cm³

Density conditions

at 20°C

Shelf life from production

24 Month

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information